User Guide
After installation, you can just select the “Local” button to start using Alert, but please experiment with the Settings. On iPhone and iPad tap the button to get to Settings; on Apple TV go up to the Menu and click on “Settings”. Here are some examples to get you started.
Sharing Alarms
You can connect two devices by setting one to “Send ” and the other to “Receive”. Apple TV is fixed to “Receive”. Please following these steps to make a connection:
- Make sure you have a good Internet connection then login to Apple Game Center on each device.
- Press “Start” on one of the Alert main screens to invite a friend.
- “Invite Friend(s)” lets you pick a friend and send them an invite, which will appear as a notification on your friend’s device. Your friend should accept this invite. You may prefer to initially use the simpler “Play Now” approach.
- Selecting “Play Now” on both devices will allow then to automatically connect to any device doing the same thing. This will usually connect to your friend on the default channel”0″. Other “Channels Numbers” can be selected in Alert’s Settings when selecting “Share” to limit who can connect to you. You both need to be using the same “Channel Number” to connect.
Personal Safety Alarm
Get a warning when people, noises or lights are detected. You may also want to know if your iPhone or iPad is moved.
- Enable Alarm “Yes”
- Graphics “None”
- Display “Dark”
- Torch “Yes” may be useful at night
- Sound Sensitivity “30”. Try different values.
- Light Sensitivity “”30”. Try different values.
- Motion Sensitivity “30”. Try different values.
- Face Detection “1”
- Display Alert “No”
- Play Alert “No”
- Repeat & Reset Alarm “∞”
- Optionally set Share to “Send” and invite someone to monitor you after tapping “”Start”. There device must be set to “Receive”. Set Graphics to “Icon”.
Activity Level Sharing
Share your activity without compromising your privacy. Allow a carer to know when you are home and active.
- Enable Alarm “No”
- Share “Send” and invite someone to monitor you. Their device must be set to “Receive”.
- Graphics “Icon”
- Display “Dark”
- Video Clip “No”
- Sound Sensitivity “1”
- Light Sensitivity “1”
- Motion Sensitivity “1”
- Face Detection “10”
Medical Alarm
Sound an alarm when a medical device needs your attention. Monitor the person you are caring for from another room and decide how you want to be informed. Remember your receiving device can be speaker docked if required.
- Enable Alarm “Yes”
- Graphics “Bar”
- Display “Dark”
- Video Clip “No”
- Sound Sensitivity “30”. Try values depending on medical device.
- Light Sensitivity “30”. Try values depending on medical device.
- Motion Sensitivity “30”. Try values depending on medical device.
- Face Detection “∞”
- Display Alert “Yes”
- Play Alert “Yes”
- Repeat Alert “0”
- Repeat & Restart Alarm “∞”
- Optionally set Share to “Send” and invite someone to monitor you after tapping “”Start”. Their device must be set to “Receive”. Set Graphics to “Icon”.
Classroom Monitor
Set a limit on the amount of noise allowed!
- Enable Alarm “Yes”
- Share “No”
- Graphics “Bar”
- Display “Light”
- Video Clip “No”
- Sound Sensitivity “20”. Try different values.
- Motion Sensitivity “0”
- Face Detection “∞”
- Sounds “Clock”
- Display Alert “Yes”
- Play Alert “Yes”
- Repeat Alert “0”
- Repeat & Restart Alarm “∞”
Snore Control
Train the snorer or at least wake them too!
- Enable Alarm “Yes”
- Share “No”
- Graphics “None”
- Display “Dark”
- Torch “Yes”
- Video Clip “No”
- Sound Sensitivity “60”. Try different values.
- Motion Sensitivity “0”
- Face Detection “∞”
- Sounds “Sci-Fi”. Varying this setting may help.
- Display Alert “No”
- Play Alert “Yes”
- Repeat Alert “0”
- Repeat & Restart Alarm “0”
Default Settings
Please return to these settings if you wish to reset the app.
- Enable Alarm “Yes”
- Share “No”
- Graphics “Circle”
- Display “Light”
- Torch “No”
- Camera “Front”
- Video Clip “No”
- Sound Sensitivity “1”
- Light Sensitivity “1”
- Motion Sensitivity “1”
- Face Detection “10”
- Sounds “Clock”
- Display Alert “Yes”
- Play Alert “Yes”
- Repeat Alert “0”
- Repeat & Restart Alarm “∞”